2-Pole Relay for 240V Kilns | Phone Orders Only

This 240V relay is designed for use with Digital Kilns, specifically for kilns with an 18" diameter and larger. Larger kilns typically require two or more relays for proper operation.

These relays cycle on and off during the firing process and have a typical lifespan of approximately 300,000 cycles. If one section of coils does not heat or stays continuously on, it indicates that the relay needs to be replaced.

For safety, if a relay fails in the "on" position, turn off the kiln at the breaker and unplug the kiln immediately. Never run the kiln again until the faulty relay is replaced. All relays must function properly for the kiln to operate efficiently.

Call us at (863) 648-0585 for assistance or troubleshooting if needed.